"A drive shaft, driveshaft, driving shaft, propeller shaft, or Cardan shaft is a mechanical component for transmitting torque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement between them.

...

Drive shafts are carriers of torque: they are subject to torsion and shear stress, equivalent to the difference between the input torque and the load. They must therefore be strong enough to bear the stress, whilst avoiding too much additional weight as that would in turn increase their inertia."

Minimatic drive shafts are the same length as manuals. The short driveshaft out of a 1100/1300/Austin America is the same as the long shaft out of a Mini.

The inboard end of driveshafts differs for different Minis depending on whether they use rubber cross joints (early cars), hardy spicer uni joints (Autos and CooperS) or inboard CV joints, ("Pot joint", used in later cars).